1. Prevent the motor from overheating:
Working in hot weather, the motor runs at high speed and generates extremely high heat. Always pay attention to the temperature around the motor and avoid long-term mechanical operations. When the temperature is too high, the feed mixer should be stopped for a period of time and work again when the temperature drops.
2. Prevent skidding:
Check and adjust the belt tension in time. The fan belt should not get oily. If the fan belt is too loose, it will slip easily, which will reduce the speed of the fan and water pump, resulting in insufficient wind power. If the fan belt is too tight, the bearing will be overloaded, which will aggravate wear and increase power consumption. If the belt is too loose or too tight, it should be adjusted in time.
3. Prevent the transmission belt from breaking:
The road surface temperature is higher in summer, so prevent exposure to strong sunlight to prevent cracking. Therefore, we must pay attention to the inspection and maintenance of the conveyor belt. In summer, we must pay attention to changing the conveyor belt from time to time to maintain the normal operation of the machine.
4. Prevention is not "burning":
Summer is a period of high incidence of mechanical spontaneous combustion. Improper operation by the driver or hidden dangers in the feed mixer are the main causes of spontaneous combustion. Therefore, it is important to check the lines of oil and electricity, and if the lines are aging, they should be repaired in time to prevent spontaneous combustion.