1. The lubricating oil should be replaced regularly in winter. In the northern winter, the weather is dry and dry. Due to the dry air in winter, the feed machine will reduce the lubricating oil during long-term operation and cause the wear of parts. Therefore, customers must pay attention to the amount of lubricating oil used in time, and must add the appropriate amount to see the reduction
2. Every time the feed mixer finishes mixing the feed, the remaining waste in the silo must be cleaned regularly, especially the waste near the feeding shaft. If it is not cleaned for a long time, it will cause the waste of the feeding shaft to accumulate and affect the feeding. The rotation of the shaft then affects production efficiency, resulting in low efficiency.
3. Due to the low temperature in winter, after the feed is mixed, the remaining waste in the silo must be cleaned regularly, especially the waste near the feeding shaft. If it is not cleaned for a long time, the feeding shaft will just start to run. It should be left idling for about 10 minutes before adding feed ingredients.
In this way, you will obviously hear that the noise from the machine is not as loud as it was at the beginning, and it runs more smoothly. This is caused by insufficient motor operation due to low air temperature and increased hardness of the pulley under cold conditions. The problem will be resolved after idling for a period of time.