Wuxi Huaqiang Feed Machinery Co.,Ltd
Add:Donghu Industrial Park, Donghu Village, Donggang Town, Xishan District, Wuxi City, Jiangsu Province
Tel:+86-0510-83780085
Fax:+86-0510-83780805
E-mail:sales@huaqiangjx.com
1. When disassembling the motor of the feed mixer, first take off the V-belt of the mixer and remove the four fixed screws. Then the motor can be easily removed. Just use the dial to remove the belt on the motor.
2. When unloading the mixer motor, first remove the eight screws on the mixer, and then remove the fixed mixer and place it on the ground. Note that the mixer is relatively heavy and requires three or four people to handle it. Be careful not to get hurt.
3. When taking the crushing impeller, first remove the four screws of the fixed crushing impeller. In the process of obtaining, pay attention to gently shaking and slowly removing it to keep the impeller from deformation, otherwise it will affect the use.
4. After disassembly and cleaning, when installing, when installing the motor, slowly place the motor in the feed mixer in the reverse direction. After the installation is completed, an empty machine test run is required to ensure that the equipment is not abnormal before it can be used.
