Wuxi Huaqiang Feed Machinery Co.,Ltd
Add:Donghu Industrial Park, Donghu Village, Donggang Town, Xishan District, Wuxi City, Jiangsu Province
Tel:+86-0510-83780085
Fax:+86-0510-83780805
E-mail:sales@huaqiangjx.com
1. The feed mixer should be installed on a stable and firm ground with a support frame, and pay attention to adjusting the height of the feed channel and the discharge channel.
2. Even if we don't use the feed mixer often, we need to repair and maintain it regularly, and clean, adjust, tighten and prevent the equipment.
3. Before using the feed mixer, the operator should check the clutch and brake to ensure that the equipment and other parts are in good condition, the wire rope is intact, and there is no foreign matter in the barrel before it can be used.
4. When the on-site inspection and maintenance of the feed mixer is required, the hopper should be fixed first and the power supply should be cut off. If the operator needs to enter the drum to deal with obstacles, professional personnel should be assigned to supervise outside. If a fault is found during operation, the operator should immediately cut off the power supply and investigate the cause.
The above is the coup for daily maintenance of feed mixer? Through the above introduction, I believe that everyone has also understood in detail. Everyone should remember to check and maintain the feed mixer before and after using the feed mixer, so as to extend the service life of the feed mixer.
