Wuxi Huaqiang Feed Machinery Co.,Ltd
Add:Donghu Industrial Park, Donghu Village, Donggang Town, Xishan District, Wuxi City, Jiangsu Province
Tel:+86-0510-83780085
Fax:+86-0510-83780805
E-mail:sales@huaqiangjx.com
1. Before normal operation of the newly purchased feed pellet machine, first take 5 kg of raw materials and 1 kg of fine sand, mix well, and then add 1 kg of waste engine oil to mix thoroughly. Start the machine, put in the mixed raw materials, and work repeatedly to grind the new machine. , Until the normal discharge.
2. Before the machine works, remove the sundries to avoid hard things entering the feed pellet machine chamber. It will directly damage the internal components of the pellet machine, and the reprocessing equipment runs at high speed, and a new feed pellet machine can be scrapped if one is not careful.
3. I often receive feedback from many users to the author, saying that "my machine's granulation is not shaped" and other issues. It should be noted that when the operator finishes the day's granulation work, the raw materials in the granulation room must be pressed to complete Then, add oil (mixed with raw material and 10% waste engine oil) to the machine to fill the die hole of the die plate to ensure that the die hole is not blocked, so that the operator will be ready for the next operation, and the next time the equipment is started will save a lot of time.
